Cold plunge tubs
Cold Plunge Tub Models & Specs
Four purpose-built cold plunge products — three tub sizes and a precision chiller system. Compare specs to find the right fit for your space, usage, and budget.
The commercial-grade workhorse. Built for multi-user environments where the tub needs to perform reliably every single day.
- Best forGyms & clinics
- CapacityAdults up to 200cm
- WallsDouble-wall insulated
- Chiller portYes — standard fit
- Warranty2 years commercial
- Setup~3 minutes
The most popular home cold plunge tub. Compact, insulated, chiller-ready — designed for dedicated daily users with limited space.
- Best forHome daily use
- CapacityAdults up to 190cm
- WallsInsulated PVC
- Chiller portYes — standard fit
- Warranty2 years
- Setup~3 minutes
The travel-ready option. Folds flat into a carry bag and sets up anywhere in under 5 minutes — no permanent installation needed.
- Best forTravel & outdoor
- CapacityStandard adult
- Packed weightUnder 3kg
- Chiller portNo
- Warranty1 year
- Setup~5 minutes
The automation upgrade. Connects to any chiller-compatible Crocpad tub to maintain precise water temperature 24/7 — no ice, no guesswork.
- Models300 PRO / 1000 PRO
- Min temp5°C precisely
- FiltrationBuilt-in
- ControlDigital display
- CompatibleLarge Pro & Ice Pod
- Warranty1 year
Which Cold Plunge Tub Should You Buy?
Answer four questions to find your model. Every scenario maps to a specific recommendation — no upselling, just the right fit.
Personal home use
You want a permanent setup — balcony, garden, garage. You'll plunge regularly and want something that looks good and holds temperature well. You're not moving it between sessions.
Commercial gym or studio
Multiple users per day. Your tub needs to handle high volume reliably, maintain hygiene easily, and come with a warranty that covers commercial use. A home-grade tub will not cut it.
Travel or outdoor events
You move between venues, travel to competitions, or want a tub you can set up and pack down without leaving it permanently installed. Portability is the priority.
Physio or health clinic
Clinical use demands consistent, verifiable temperatures, reliable daily operation, and a commercial warranty. Patient safety requires precision — not a consumer product used professionally.
Do You Need a Chiller?
A cold plunge tub without a chiller is still a perfectly functional setup — you add ice before each session, wait for it to reach temperature, and plunge. For occasional users, this works fine.
The case for a chiller is purely about frequency and convenience. At 3+ sessions per week, the ice cost and preparation time adds up fast. A Boreon chiller maintains your exact target temperature continuously — the tub is always ready, always at the right temperature, and you never buy ice again.
The Boreon 300 PRO suits home and single-user setups. The Boreon 1000 PRO is sized for commercial volumes and faster cooldown after high-turnover use in gyms and clinics.
Full Product Comparison
Everything you need to compare models in one table. Scroll right on mobile.
| Spec | Large Pro | Ice Pod | Portable Pod | Boreon 300 PRO | Boreon 1000 PRO |
|---|---|---|---|---|---|
| Best use | Commercial / gym | Home daily | Travel / outdoor | Home chiller | Commercial chiller |
| Users per day | Multiple | 1–2 | 1–2 | 1–2 | 10+ |
| Insulated walls | ✓ | ✓ | ✓ | N/A | N/A |
| Chiller port | ✓ | ✓ | – | N/A | N/A |
| Folds flat | – | – | ✓ | – | – |
| Min temperature | Ice or chiller | Ice or chiller | Ice only | 5°C | 5°C |
| Digital temp control | – | – | – | ✓ | ✓ |
| Built-in filtration | – | – | – | ✓ | ✓ |
| Setup time | ~3 min | ~3 min | ~5 min | ~10 min | ~10 min |
| Warranty | 2 yrs commercial | 2 years | 1 year | 1 year | 1 year |
| Clark Rubber stores | ✓ | ✓ | ✓ | – | – |
Where and How to Set Up Your Cold Plunge Tub
No plumbing required. Every Crocpad cold plunge tub is designed for straightforward self-installation in a standard Australian home or commercial space.
Level surface with drainage access nearby. Balcony, garden, garage, or laundry area all work. Ensure access to a garden hose or tap for filling. No plumbing connections required.
The Boreon chiller sits beside the tub and connects via inlet/outlet hoses included in the kit. It requires a standard 240V power point within reach. Place on a stable surface — do not submerge.
Fill to the marked level using cold tap water. The chiller will bring it to your target temperature automatically — this takes 30–90 minutes depending on ambient temperature and starting water temp.
Use the Boreon's digital display to set your target. Recommended starting range is 12–15°C for new users. The chiller maintains this automatically — no manual ice adjustment needed.
For gym or clinic installs: ensure floor drainage is within 2m of drain point. The Large Pro can sit directly on concrete, tiles, or outdoor pavers. Anti-slip matting recommended for high-traffic areas.
Water Care & Maintenance Schedule
How you maintain your cold plunge tub depends on whether you're using ice or a chiller. Both setups are straightforward — here's exactly what to do.
Ice-Based Maintenance
- Drain and rinse completely every 5–7 sessions or once per week with regular use
- Wipe interior with a mild non-abrasive cleaner before refilling
- Rinse thoroughly — no cleaning product residue in the water
- Add a small amount of approved spa sanitiser if extending water beyond 3 sessions
- Cover with the thermal lid when not in use to prevent debris and sunlight exposure
- Inspect seams and drain seal monthly for wear
Chiller-Assisted Maintenance
- Built-in filtration significantly extends water life — most users change every 2–4 weeks
- Add approved spa sanitiser weekly to maintain water hygiene through the filter cycle
- Clean chiller inlet filter monthly — rinse under tap water, no tools required
- Full water drain and tub clean every 3–4 weeks — same process as ice-based setup
- Check chiller hose connections at each water change for tightness
- Run chiller in circulation mode for 30 minutes after refilling before first use
High-Volume Facility Maintenance
- With Boreon 1000 PRO: change water weekly given higher multi-user load
- Test sanitiser levels daily using standard spa test strips
- Wipe tub exterior and surround after each session for hygiene compliance
- Clean chiller filter every 2 weeks under high commercial use
- Log water changes and sanitiser additions for health compliance documentation
- Annual professional inspection recommended for commercial warranty maintenance
What Customers Say About the Purchase
"The Large Pro with the 1000 PRO chiller was exactly what our gym needed. Setup took less than an hour, our members love it, and the maintenance is genuinely minimal. The commercial warranty gave us confidence to make the investment."
"The comparison table on the website made the decision easy. Got the Ice Pod with the Boreon 300 PRO. Took 20 minutes to set up on my balcony. The chiller means I never have to think about it — I just use it."
"Bought mine from Clark Rubber in Penrith so I could actually see the size before committing. The staff knew the product well. Arrived home, set it up, done. Exactly as described — no surprises."
See Them In Person at
Clark Rubber Near You
Crocpad is the only major cold plunge brand stocked in a national retail chain. See and touch the tubs before you buy at 65+ Clark Rubber stores across Australia.
Find My Nearest Store →Cold Plunge Tub Buying FAQ
How to Buy a Cold Plunge Tub in Australia: A Practical Guide
If you've already decided cold water immersion is for you and you're now comparing cold plunge tubs — this guide is written specifically for that stage of the decision. It covers what to look for in a tub, how to evaluate the chiller question, what the genuine differences are between models, and why purchasing from a brand with national retail presence matters.
If you're still researching whether cold water immersion is right for your training or wellness goals, our Ice Baths page covers the science, protocols, and benefits in detail.
What Separates a Good Cold Plunge Tub from a Poor One
The cold plunge tub market has grown rapidly in Australia, and with growth comes a wide quality spectrum. Key construction indicators to evaluate before purchasing:
- Double-wall insulation that slows temperature loss — critical for consistent sessions and reduced ice or chiller running costs
- Structural integrity rated for repeated fill-drain cycles — cheap tubs degrade at seams and drain fittings within months
- Standard chiller port dimensions — proprietary fittings lock you into a single chiller brand at inflated cost
- UV-resistant exterior — essential for any outdoor Australian installation
- Drain position and size — slow drains make water changes time-consuming and frustrating for regular users
- Commercial vs residential warranty — the difference matters enormously for gym and clinic buyers
Why the Chiller Decision Matters More Than the Tub Decision
Most buyers focus their research on the tub. In practice, the chiller decision has a larger long-term impact on your experience. A quality tub without a chiller is functional but requires active management every session. A quality tub with a chiller becomes a zero-effort infrastructure — you set it once and it's always ready.
The genuine break-even analysis is simple: if you'll use your cold plunge tub 3 or more times per week, a Boreon chiller will save you money within months compared to buying ice, while also delivering better temperature consistency and significantly less maintenance overhead. For commercial users with 10+ sessions per day, the chiller is non-negotiable.
Commercial Cold Plunge Tubs: What's Actually Different
The distinction between home-grade and commercial-grade is not just marketing language — it reflects meaningful differences in materials, construction tolerances, drainage capacity, and warranty terms. Commercial cold plunge tubs are rated for daily multi-user use without degradation in seals, surfaces, or structural integrity. The Crocpad Large Pro is the appropriate choice for any Australian facility intending to offer cold plunge therapy as a service.
Buying In-Store vs Online
Crocpad is the only major cold plunge brand stocked nationally in Australian retail — 65+ Clark Rubber stores from Perth to Cairns. For buyers making a significant investment, particularly commercial buyers, in-store purchase allows physical inspection of materials, seam quality, and drain fittings before committing. Online purchase at crocpad.com.au includes free Australia-wide shipping and the same warranty terms as in-store.
Installation Requirements: What You Actually Need
No plumbing licence, no trades required. Every Crocpad cold plunge tub is designed for self-installation. You need: a level surface, a tap or garden hose within reach for filling, drainage within 2–3 metres of the drain point, and a standard 240V power point if using a Boreon chiller. Installation takes under 20 minutes for all models.
FLOATING WATER MATS
- Determine the size and location of the damage.
- If the damage is at the edge of the mat, we recommend cutting out the damaged section to prevent it from being a weak point.
- For small tears, use spray foam glue.
- For larger tears, we suggest using a leather PVC patch and following the video instructions.
Please follow the instructions in page 3 of the water mat manual.
INFLATABLE PRODUCTS
Inflatable slides, Dog ramps, etc.- To easily deflate the slide, use the 500W E-pump in deflate mode.
- Before deflating the stepping pad, ensure there is no water remaining in it.
- After deflating the pad, roll the slide tightly until it fits into the storage bag.
- Use the straps to secure the rolled-up slide.
All Crocpad inflatable products come with a repair kit that includes PVC patches and glue. Follow these steps to repair a leak or hole:
- Locate the leak or hole.
- Cut a patch that is at least ½ inch larger than the tear.
- Apply a small amount of glue to the patch.
- Place the patch over the tear, ensuring it is well-covered.
- Place a heavy and flat object over the patch.
- Allow the glue to dry for at least 12 hours.
All Crocpad inflatable products come with a repair kit that includes glue. Follow these steps to repair a seam:
- Locate the leak
- Clean the area
- Apply a small amount of glue
- Place a heavy and flat object over the patch.
- Allow the glue to dry for at least 6-12 hours.
More details in this link.
All Crocpad inflatable products come with a repair kit that includes PVC patches and glue. To repair or add a D ring patch, follow these steps:
- Prepare the D ring patch, which can be purchased from Crocpad.
- Locate the new patch position near the existing D ring, ensuring it is close enough to anchor effectively.
- Apply a small amount of glue to the patch.
- Place the patch near the defective one.
- Allow the glue to dry for at least 24 hours.
To protect your Crocpad slide from rough surfaces like tiles or pavers, follow these tips:
1. Use a Protective Mat:
- Place a durable, non-slip mat or tarp under the slide to create a buffer between the surface and the slide.
2. Inflate Properly:
- Ensure the slide is fully inflated to reduce friction and prevent sagging that can cause unnecessary contact with rough surfaces.
3. Avoid Dragging:
- When moving the slide, lift it completely instead of dragging it across the ground.
4. Inspect the Surface:
- Clear the area of sharp objects, debris, or anything that could puncture or scratch the material.
5. Store Safely:
- When not in use, deflate and store the slide in a clean, dry area away from sharp or abrasive surfaces.
These steps will keep your slide in top condition and extend its lifespan!
We suggest starting with a vinegar and water solution, or simply soap and water. If that doesn’t remove the mould, you can try a small amount of diluted methylated spirits on a soft cloth.
Test it on a small area first, then rinse thoroughly with water afterwards.
Please note
- Methylated spirits can weaken PVC, so use the least amount possible and always follow up with a water clean.
- Always rinse and air-dry fully in the sun before packing away
How to Set Up an Ice Bath at Home
Everything You Need for a Safe and Effective Recovery PlungePick a container that fits your body comfortably:
- Bathtub, stock tank, portable ice bath, or a professional plunge like Crocpad.
- Ensure it’s deep enough to submerge your shoulders.
Indoors: bathroom, laundry, or garage (with drainage).
Outdoors: backyard, patio, or balcony (on a flat, shaded surface).
Start with cold tap water.
Target 10–15°C (50–59°F) for recovery. Beginners can start slightly warmer.
Add 20–40kg of ice or reusable frozen bottles.
For hassle-free daily plunges, use a chiller system like Crocpad that maintains water temperature.
- Rinse off before plunging.
- Drain and refill small tubs every 2–3 uses.
- For bigger tubs, use a filter or sanitizing agent.
- Cover when not in use to keep debris out.
- Start with 2–3 minutes and progress to 5–10 minutes.
- Breathe calmly, never force it.
- Keep your head above water at all times.
- Always have a towel and warm clothes ready for after.
- Dry off and warm up slowly.
- Plunge 3–4 times per week for best results.
WATERPROOF STORAGE BAGS
Dry bag or water mat storage bag- Place the water mat or your staff into the bag, align the top edges of the bag, and squeeze them together.
- Tightly roll down the top of the bag at least three times. For a better seal, roll it down all the way until you reach the water mat or staff, increasing the tension on the closure.
- Clip the two middle buckles together.
- Bend the ends in the opposite direction towards the back, away from the side where you rolled the top down. This puts more tension on the fold and enhances the seal.
- Buckle the ends together, and you're done.
